Defy LAUNDROMAID 1300 Owner's Manual download pdf (Page 4)

Page 4

UNPACKING

• Remove all packaging and dispose of it in a responsible manner.

• Open the wash-tub lid and remove all the accessories stored in the drum.

• Do not attempt to operate the machine while any of the packaging is still in place.

POSITIONING

• The machine should be installed in a well ventilated

place, away from direct sunlight.

• Hot and cold water taps should be located within 1 metre

of the inlet valves.

• Positioned the machine on a flat and stable uncarpeted

floor capable of supporting the fully loaded washer.

• An adjustable levelling foot is located at the right front

of the machine and may be turned in or out to achieve

stability. An unstable machine will vibrate and generate

excessive noise.

DRAIN HOSE

• Connect the drain hose to the drain outlet at the rear of

the machine and secure it with the hose clamp supplied.

• Hook the outlet end of the drain hose over the lip of a

sink or outlet pipe.

SINK OR LAUNDRY TUB DRAIN

• The top lip of the sink must be at least 860mm (A) above

floor level and not higher than 1300mm.

PIPE DRAIN

• The minimum inside diameter of the pipe drain should be

30mm and the pipe should be able to drain 30 litres per

minute.

• The top lip of the pipe should be at least 860mm (B)

above floor level and not higher than 1300mm.

Installation

Drain hose

Hose clamp

Drain

outlet

1 2 3 4 5 6 7 8 9 ... 15 16

Owen Vuba 02 Jul 2024 | 13:15:18

Hi, I need a wiring diagram for Defy laundromaid Electrologic 1300. NOT THE OWNERS MANUAL

Jennifer 17 Aug 2024 | 14:07:46

I can't open filter

Carolina 22 Oct 2024 | 16:54:23

The water does not poor in from the pipe though the tap is open

Lord Sir Jacob 28 Jul 2025 | 14:46:06

I need the Schematic diagram for the Defy Laundromaid 13kg washing top loader

Defy LAUNDROMAID 1300 Owner's Manual Page 4